Microcellular Rubber Sheets
This product is based on styrene-butadien Rubber and natural Rubber
Application: All kinds of shoes, shoe-soles, slippers,Insulators thermic and phonic.
Specifications:
Hardness (shore A): |
40 - 60 |
Density gr/cm3: |
0.40 - 0.60 |
Dimensions & Colours |
on demands |
EVA CROSSLINKED FOAM SHEETS
We manufacture EVA and polyethylene chemically crosslinked foam sheets results in extremly fine closed cells and smooth surface. These sheets are available in different thicknesses , hardness, densities and colours.
Crosslinked EVA sheets/
polyethylene foam has the following charasteristics:
- Low Compression set.
- Highly resilient.5
- Smooth surface.
- Available in different thickness, density, hardness and colours.
- Inert to most of the toxic chemicals and oils.
- Excellent thermal insulation.
- Available in laminated, embossed, thermoformed and slitted forms.
APPLICATIONS
EVA crosslinked foam sheets are being used for the following:
Shoes:
Mid-sole, insole and other components.
Slippers & Sandals:
Sole, footbeds strap.
Sports & leisure:
Camping Mats, Gymnastic Mats, Exercise Mats, Pool Covers, Swimmer Kickboards, Body Protectors, Helmet Liners, Life vests, Bicycle handle Grips, Gymnasium Equipment seats ...etc.
Automotive:
Interior ceiling, Sun-Visor, Slide Trim, Door Trim, Gaskets and seat.
Construction:
Expansion Joints, Sound absorber, Heat insulation, Pipe protector.
Pakaging:
Display packaging, corner blocks, Wrappings.
Toys:
Puzzles and Toys.
Others:
Sun-cap, Foam tapes, Toilets seat covers, Mouse Pads, Door mats ...etc.
EVA Compound
Characteristics: EVA Compounds are especially developed for injection Molding cross-linked EVA foams. They are suitable for injection Molding of high quality sandals, Mid. sale
Application Field: Injection molding of: Slippers - Sandals - mid-soles.
Dakkak B. CO 200-1:
Product Information:
Dakkak is a fully E.V.A compounds especially developed for Injection Molding CROSS-LINKED FOAM. The compounds are suitable for precise Molding of high Quality Slippers, Sandals, and Helmets.
Injection
molded Foam |
Property |
Tech. Value |
Unit |
Test method |
Density |
200-220 |
Kg/m3 |
ASTM D-3575 |
Hardness |
55-60 |
Shore |
ASKER C |
Tensile Strength at break |
22-25 |
Kg/cm2 |
ASTM D-638 |
Elongation at break |
200-230 |
% |
ASTM D-638 |
Comression set 50 c/ 6h |
45-50 |
% |
ASTM D-395 |
Abrasion Resistance |
|
|
|
Applications |
Mid-Soles |
|
|
Linear Growth |
1.60 |
% |
|
Main Features |
Glossy |
|
|
Typical
Injection Molding Conditions
|
Barrel Temperature |
90-110 c |
Mold Temperature |
160-185 c |
Cycle Time |
6-9 min |
Dakkak B. CO 200-2:
Product Information:
Dakkak 200-2 is a fully E.V.A compound especially developed for Injection Molding CROSS-LINKED FOAM. the compound is suitable for precise molding of high Quality mid-soles, insole.
|
Injection molded Foam
|
|
Property
|
Tech. Value
|
Unit
|
Test method
|
|
Density
|
200-220
|
Kg/m3
|
ASTM D-3575
|
|
Hardness
|
60
|
Shore
|
ASKER C
|
|
Tensile Strength at break
|
22-26
|
Kg/cm2
|
ASTM D-638
|
|
Elongation at break
|
200-230
|
%
|
ASTM D-638
|
|
Comression set 50 c/ 6h
|
60
|
%
|
ASTM D-395
|
|
Abrasion Resistance
|
|
|
|
|
Applications
|
Mid-Soles
|
|
|
|
Linear Growth
|
1.56
|
%
|
|
|
Main Features
|
Glossy
|
|
|
|
Typical
Injection Molding Conditions
|
|
Barrel
Temperature
|
90-110
c
|
|
Mold
Temperature
|
160-185
c
|
|
Cycle
Time
|
6-9
min
|
Dakkak B. CO 350:
Product Information:
Dakkak 350 is fully E.V.A compound developed especially for Sole
|
Property |
Tech. Value |
Unit |
Test method |
Density |
220 |
Kg/m3 |
ASTM D-3575 |
Hardness |
70 |
Shore |
ASKER C |
Tensile Strength at break |
25-30 |
Kg/cm |
ASTM D-638 |
Elongation at break |
250-300 |
% |
ASTM D-638 |
Comression set 50 c/ 6h |
50 |
%
|
ASTM D-395 |
Abrasion Resistance |
110-130 |
mm3 |
DIN 53516/5N |
Applications |
out-Soles |
|
|
Linear Growth |
1.4 |
% |
|
Main Features |
Glossy |
|
|
|
Typical
Injection Molding Conditions
|
|
Barrel Temperature
|
90-110
c
|
|
Mold
Temperature
|
160-185
c
|
|
Cycle
Time
|
4-8
min
|
Packing: Products are available in 25 kg sacks.
Dakkak Sandle made of EVA has these characteristics:
- Wholesome, comfortable for feet, suitable for picnic walking
and can be worn and taken off easily.
- Mrine, suitable for seashore walking and swimming.
- Durable with lightweight, floating on the water surface.
- non-slide on wet slabs, friction resistant.
- Bright colours and woderful, fine looking appearance
The sandles are availble with various sizes and different colours
according to the customers requirements.
   
Rubber Compounds
Dakkak Company have the Facilities to offer extensive production to include Injection, Compression transfer molding metal to rubber bonding compounds.
|
